User's Manual

C HAPTER 3 | Quick Installation Guide
Quick Installation Guide
– 28 –
a. If the connection type detected is PPPoE, the screen shown in
Figure 10 will display.
Figure 10: Quick Setup – PPPoE
●
User Name and Password — Enter the User Name and
Password provided by your ISP. These fields are case sensitive.
If you have difficulty with this process, contact your ISP.
b. If the connection type detected is Dynamic IP, the screen shown in
Figure 12 will display. You can then continue with the wireless
configuration.
c. If the connection type detected is Static IP, the screen shown in
Figure 11 will display.
Figure 11: Quick Setup - Static IP
●
IP Address - This is the WAN IP address as seen by external
users on the Internet (including your ISP). Enter the IP address
into the field.
●
Subnet Mask - The Subnet Mask is used for the WAN IP
address, it is usually 255.255.255.0.
●
Default Gateway - Enter the gateway IP address into the box,
if required.
●
Primary DNS - Enter the DNS Server IP address into the box, if
required.