User's Manual
Table Of Contents
- Warranty and Product Registration
- Compliances
- About This Guide
- Contents
- Figures
- Tables
- Introduction
- Connecting the Router
- Quick Installation Guide
- Configuring the Router
- Configuring the PC
- FAQ
- Specifications
- Glossary
- Index
C
HAPTER
1
| Introduction
Rear Panel
– 21 –
REAR PANEL
Figure 2: Rear Panel
The following items are located on the rear panel (from left to right).
WIRELESS ANTENNAS Receives and transmits wireless data.
POWER The Power socket is where you connect the power adapter. Use the power
adapter provided with the Router.
RESET BUTTON There are two ways to reset the Router to its factory defaults:
◆ Use the Factory Defaults function on the “System Tools - Factory
Defaults” page in the Router's Web-based interface.
◆ Use the Factory Default Reset button: With the Router powered on, use
a pin to press and hold the Reset button for about 5 seconds until the
System LED turns to quick flashing from slow flashing. Then release the
button and wait for the Router to reboot to its factory default settings.
ETHERNET WAN PORT This WAN port is where you connect the DSL/cable Modem.
ETHERNET LAN
PORTS
LAN1,2,3,4: These ports (1, 2, 3, 4) connect the Router to local PCs.