User's Manual
Table Of Contents
- Warranty and Product Registration
- Compliances
- About This Guide
- Contents
- Figures
- Tables
- Introduction
- Connecting the Router
- Quick Installation Guide
- Configuring the Router
- Configuring the PC
- FAQ
- Specifications
- Glossary
- Index
C
HAPTER
1
| Introduction
Front Panel
– 20 –
FRONT PANEL
Figure 1: Front Panel
LED INDICATORS The
Router
includes ten status LED indicators, as described in the following
table.
N
OTE
:
After a device is successfully added to the network by WPS, the WPS
LED will remain on for about 5 minutes and then turn off.
Table 2: LED Behavior
LED Status Description
Power On The unit is receiving power and is operating normally.
Off There is no power currently being supplied to the
unit.
System On The Router is initializing or may have a system error.
Blinking The Router is working properly.
Off The Router has a system error.
WLAN On/Blinking The Wireless function is enabled.
Off The Wireless function is disabled.
WAN
LAN (1-4)
On There is a device linked to the corresponding port, but
there is no activity.
Blinking There is an active device linked to the corresponding
port.
Off There is no device linked to the corresponding port.
WPS On A wireless device has been successfully added to the
network by WPS. The LED will remain on for about 5
minutes.
Slow Blinking A wireless device is connecting to the network by
WPS. This process lasts for about 2 minutes.
Off WPS is not in progress.