User's Manual
Table Of Contents
- Warranty and Product Registration
- Compliances
- About This Guide
- Contents
- Figures
- Tables
- Introduction
- Connecting the Router
- Quick Installation Guide
- Configuring the Router
- Configuring the PC
- FAQ
- Specifications
- Glossary
- Index
A
PPENDIX
B
| FAQ
I want to build a WEB Server on the LAN, what should I do?
– 127 –
N
OTE
:
When the above configuration takes effect, you can configure the
Router by typing “http://192.168.2.1:88” (the Router’s LAN IP address:
Web Management Port) in the address field of the Web browser.
2. Configure a Virtual Server:
a. Log in to the Router, click “Forwarding” on the menu, and then click
"Virtual Servers" on the submenu.
b. On the "Virtual Servers" page, click “Add New”.
c. On the “Add or Modify a Virtual Server” page, enter “80” into the
field for the “Service Port”.
d. Enter your IP address in the “IP Address” field (for example,
192.168.2.188).
e. Set to Enable and then Save.
Figure 133: Virtual Servers
Figure 134: Add or Modify a Virtual Server Entry