User's Manual
Table Of Contents
- Warranty and Product Registration
- Compliances
- About This Guide
- Contents
- Figures
- Tables
- Introduction
- Connecting the Router
- Quick Installation Guide
- Configuring the Router
- Configuring the PC
- FAQ
- Specifications
- Glossary
- Index
A
PPENDIX
A
| Configuring the PC
Install TCP/IP Components
– 120 –
Figure 123: Internet Protocol Properties
b. Set the IP address manually.
Select “Use the following IP address” radio button and enter the
following items:
— If the Router's LAN IP address is 192.168.2.1, type an IP
address such as 192.168.2.x (where x is from 2 to 254), and
Subnet mask as 255.255.255.0.
— Type the Router’s LAN IP address (the default IP is 192.168.2.1)
into the Default gateway field.
— Select “Use the following DNS server addresses” radio button. In
the “Preferred DNS Server” field, type the DNS server IP
address that has been provided by your ISP.