User's Manual

C HAPTER 4 | Configuring the Router
System Tools
– 114 –
◆ User Name - Your mail account name filled in the From field. The part
after @ is excluded.
◆ Password - Your mail account password.
◆ Confirm The Password - Enter the password again to confirm.
◆ Enable Auto Mail Feature - Select it to mail logs automatically. You
could mail the current logs either at a specified time everyday or by
intervals, but only one could be the current effective rule. Enter the
desired time or intervals in the corresponding field as shown in
Figure 117.
Click Save to keep your settings.
Click Back to return to the previous page.
Click the Next button to go to the next page, or click the Previous button
return to the previous page.
STATISTICS Select System Tools->Statistics from the menu; you can view the
statistics of the Router, including total traffic and current traffic of the last
Packets Statistic Interval.
Figure 118: Statistics
◆ Current Statistics Status - Enable or Disable. The default value is
disabled. To enable, click the Enable button.
◆ Packets Statistics Interval (5-60) - The default value is 10. Select a
value between 5 and 60 seconds in the pull-down list. The Packets
Statistic interval indicates the time section of the packets statistic.
Select the Auto-refresh checkbox to refresh automatically.
Click the Refresh button to refresh immediately.