User's Manual

C HAPTER 4 | Configuring the Router
System Tools
– 105 –
SYSTEM TOOLS
Select System Tools, and you can see the submenus under the main
menu: Time Settings, Diagnostic, Settings Management, Password, System
Log, Statistics, Local Management, and Remote Management. Click any of
them, and you will be able to configure the corresponding function. The
detailed explanations for each submenu are provided below.
Figure 107: The System Tools Menu
TIME SETTINGS Select System Tools->Time Setting from the menu; you can configure
the time on the following screen.
Figure 108: Time Settings
◆ Time Zone - Select your local time zone from this pull down list.
◆ Date - Enter your local date in MM/DD/YY into the right blanks.
◆ Time - Enter your local time in HH/MM/SS into the right blanks.
◆ NTP Server Prior - Enter the address for the NTP Server, then the
Router will get the time from the NTP Server preferentially. In addition,
the Router includes some common NTP Servers, so it can get the time
automatically once it connects the Internet.