User's Manual

C HAPTER 4 | Configuring the Router
QoS Settings
– 104 –
◆ Egress bandwidth - This field displays the maximum and minimum
upload bandwidth through the WAN port, the default is 0.
◆ Ingress bandwidth - This field displays the maximum and minimum
download bandwidth through the WAN port, the default is 0.
◆ Enable - This displays the status of the rule.
◆ Modify - Click Modify to edit the rule. Click Delete to delete the rule.
To add/modify a QoS rule, follow the steps below.
1. Click “Add New,” as shown in Figure 105, you will see a new screen
shown in Figure 106.
2. Enter the information like the screen shown below.
3. Click the Save button.
Figure 105: QoS Rule List
Figure 106: Qos Rule Settings