User's Manual

6
Indicator
Color
Status
Description
-
Off
The Ethernet interface is
disconnected.
WLAN
Green
On
WLAN is enabled.
Green
Blink
Data is being transmitted through the
wireless interface.
-
Off
WLAN is disabled.
WPS
Green
On
Connection succeeds under Wi-Fi
Protected Setup.
Green
Blink
Negotiation is in progress under
Wi-Fi Protected Setup.
-
Off
Wi-Fi Protected Setup is disabled.
USB
Green
On
USB device is connected.
Green
Blink
Data is being transmitted.
-
Off
USB device is disconnected.
3.1.2 Rear Panel
Figure 2 Rear panel
The following table describes the interfaces or the buttons on the rear panel.
Interface
Description
Line
RJ-11 port, for connecting the ADSL cable.
WLAN
WLAN switch, for enabling or disabling the WALN function.
Reset
Press the button for at least 1 second and then release it. System
restores the factory default settings.
WPS
This button is used for enabling WPS PBC mode. If WPS is enabled,
press this button, and then the wireless router starts to accept the
negotiation of PBC mode.
LAN 4~1
RJ-45 port, for connecting the router to a PC or another network