User's Manual

77
Figure 101 Packet Acceleration
In this page, you can enable or disable Packet Flow Accelerator.
After finishing setting, click Apply/Save to save and apply the settings.
5.2.14 Interface Grouping
Choose Advanced Setup > Interface Grouping and the following page appears.
Figure 102 Interface grouping configuration
Interface grouping supports multiple ports to PVC and bridging groups. Each group
will perform as an independent network. To support this feature, you must create
mapping groups with the appropriate LAN and WAN interfaces using the Add button.
The Remove button will remove the grouping and add the ungrouped interfaces to
the default group. Only the default group has IP interface.