User's Manual

47
Step5 In this page, you may modify the service description. Click Next to
display the following page.
Figure 55 WAN IP settings (IPoA)
Step6 In this page, enter the WAN IP address and the WAN subnet mask
provided by your ISP and then click Next to display the following page.
Figure 56 Network address translation settings (IPoA)
In this page, Network Address Translation (NAT) allows you to share one Wide
Area Network (WAN) IP address for multiple computers on your Local Area
Network (LAN).
If you do not want to enable NAT, and wish the user of modem to access the
Internet normally, you need to add a route on the uplink equipment. Otherwise, the
access to the Internet fails. Normally, please enable the NAT function.
Step7 After finishing setting, click Next to display the following page.