User's Manual

100
Figure 130 Viewing the system log
In this page, you can view the system log.
Click the Refresh button to refresh the system log. Click the Close button to exit.
 Configuring the System Log
Click the Configure System Log button to display the following page.
Figure 131 Configuring the system log
In this page, you can set 3 types of system log modes, including Local, Remote, and
Both.
 Local: When selecting Local, the events are recorded in the local memory.
 Remote: When selecting Remote, the events are sent to the specified IP
address and UDP port of the remote system log server.
 Both: When selecting Both, the events are recorded in the local memory or
sent to the specified IP address and UDP port of the remote system log
server.
After finishing setting, click the Apply/Save button to save and apply the settings.