User's Manual

Quick Start Guide
– 5 –
6. Connect to the
Console Port
To make initial configuration changes to the AP, connect a PC to the AP’s console
port using the included console cable.
From a PC running VT-100 terminal emulator software, use the following settings:
◆ Baud rate — 115,200 bps
◆ Character Size — 8 Characters
◆ Parity — None
◆ Stop bit — One
◆ Data bits — 8
◆ Flow control — none
Log in to the command-line interface (CLI) using default settings:
◆ Login Name — admin
◆ Password — null (there is no default password)
For information on AP configuration and CLI commands, refer to the Management
Guide, which is on the Documentation CD included with the AP.
Remove the waterproof cover from the
Console port.
Use the included RJ-45-to-DB-9 console cable.
Connect to the AP’s console port.
1
2
3
1
2
3