User Manual R01

Appendix D | Safety and Regulatory Information
– 50 –
PSE Alarm 本製品に同梱いたしております電源コードセットは、
本製品専用です。本電源コードセットは、本製品以外の
製品並びに他の用途でご使用いただくことは出来ません。
製品本体に同梱された電源コードセットを利用し、他製品
の電源コードセットを使用しないで下さい。
Power Cord Safety Please read the following safety information carefully before installing the switch:
Warning: Installation and removal of the unit must be carried out by qualified
personnel only.
■ The unit must be connected to an earthed (grounded) outlet to comply with
international safety standards.
■ Do not connect the unit to an A.C. outlet (power supply) without an earth
(ground) connection.
■ The appliance coupler (the connector to the unit and not the wall plug) must
have a configuration for mating with an EN 60320/IEC 320 appliance inlet.
■ The socket outlet must be near to the unit and easily accessible. You can only
remove power from the unit by disconnecting the power cord from the outlet.
■ Electrostatic Discharge according to IEC 61000-4-2:2008
ED. 2.0
■ Radio-frequency electromagnetic field according to
IEC 61000-4-3:2010 ED. 3.2
■ Electrical fast transient/burst according to IEC 61000-4-
4:2012 ED. 3.0
■ Surge immunity test according to IEC 61000-4-5:2014 ED.
3.0
■ Immunity to conducted disturbances, Induced by radio-
frequency fields: IEC 61000-4-6:2013 ED. 4.0
■ Power frequency magnetic field immunity test according to
IEC 61000-4-8:2009 ED. 2.0
■ Voltage dips, short interruptions and voltage variations
immunity test according to IEC 61000-4-11:2004 ED. 2.0
LVD:
■ EN 60950-
1:2006+A11:2009+A1:2010+A12:2011+A2:2013