User Manual R01

– 49 –
D Safety and Regulatory
Information
FCC Class A This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
You are cautioned that changes or modifications not expressly approved by the
party responsible for compliance could void your authority to operate the
equipment.
You may use unshielded twisted-pair (UTP) for RJ-45 connections - Category 3 or
better for 10 Mbps connections, Category 5 or better for 100 Mbps connections,
Category 5, 5e, or 6 for 1000 Mbps connections. For fiber optic connections, you
may use 50/125 or 62.5/125 micron multimode fiber or 9/125 micron single-
mode fiber.
Japan - VCCI Class A この装置は , クラス A 情報技術装置です。この装置を家庭環境で使用す
ると電波妨害を引き起こすことがあります。この場合には使用者が適切な
対策を講ずるよう要求されることがあります。 VCCI-A
CE Mark CE Mark Declaration of Conformance for EMI and Safety (EEC)
This information technology equipment complies with the requirements of the
Council Directive 2014/30/EU on the Approximation of the laws of the Member
States relating to Electromagnetic Compatibility and 2014/35/EU for electrical
equipment used within certain voltage limits. For the evaluation of the compliance
with these Directives, the following standards were applied:
RFI Emission:
■ Limit according to 55032:2012+AC:2013, Class A
■ Limit for harmonic current emission according to EN 61000-
3-2:2014, Class A
■ Limitation of voltage fluctuation and flicker in low-voltage
supply system according to EN 61000-3-3:2013
Immunity:
■ Product family standard according to EN 55024:2010+
A1:2015