User Manual R01

– 48 –
C LED Control Utility
The custom-defined Status LEDs can be controlled using a software utility. If you do
not have the Utility file, contact Edgecore sales or technical support.
Figure 25: Status LEDs
1. Make sure you have the Utility file, which includes two files; devmen2.c and
test_led.py.
2. At the Linux command line, type gcc -o devmem2 devmem2.c to compile.
3. Execute test_led.py to see detailed information and how to use the utility.
Figure 26: LED Control Utility
1. Status 1 and Status 2 LEDs
1