User Manual R01

Chapter 4
| Server Connections
Connecting to 1000BASE-T Network Ports
– 30 –
Figure 15: Connecting to 1000BASE-T RJ-45 Ports
2. Attach the other end to an RJ-45 port on the server.
3. As a connection is made, the status LEDs on the server port will turn on to
indicate that the connection is valid.
1. RJ-45 network port
Table 4: RJ-45 Port Status LEDs
LED Condition Status
Status (link/activity) On/Blinking Green The port has a valid 1 Gbps link. Blinking indicates traffic
passing through the port.
On/Blinking Amber The port has a valid 10/100 Mbps link. Blinking indicates
traffic passing through the port.
Off There is no valid link on the port.
1