User Manual R01

Chapter 3
| Chassis Installation
Installing the Server Appliance on a Desktop
– 23 –
Installing the Server Appliance on a Desktop
The server appliance can be installed on a desktop or shelf.
To install the appliance on a desktop, follow these steps:
1. Attach the four adhesive feet to the bottom of the device.
Figure 10: Installing the Appliance on a Desktop
2. Set the device on a flat surface near an AC power source, making sure there
are at least two inches of space on all sides for proper air flow.
Appliance Cooling Requirements
Wherever the appliance is located, be sure to pay close attention to the device’s
cooling requirements. The location should be well ventilated and provide
unrestricted air flow at the front, back, and sides of the appliance. If the air flow is
insufficient, it may cause the appliance to overheat and possibly fail.
1. Adhesive feet.
1