RPS900W_IG-R01_1014

Chapter 2

| Installing the RPS

Understanding the SYS and PoE LEDs

– 23 –

4. Check the LEDs on the RPU to ensure that the DC voltages being supplied to the

switch are correct. If not, recheck the power cord connections at the AC supply

source and back panel power input connector. See “Understanding the SYS and

PoE LEDs” on page 23.

Understanding the SYS and PoE LEDs

The RPS includes LED indicators for each DC supply to indicate their status. The LEDs

are located on the right-side of the front panel as shown below and described in the

following table.

Figure 11: SYS and PoE LEDs

Table 2: AC Power Supply Specifications

Item Description

AC Input AC 100-240 V, 50-60 Hz, 12 A @ 100 VAC, 6 A @ 240 VAC

Power Supply 100-240 VAC, 50-60 Hz, auto-sensing

Maximum Power Output 11.3 VDC: 126 W

53.8 VDC: 780 W

SYS Status LED PoE Status LED