RPS900W_IG-R01_1014

Chapter 2

| Installing the RPS

How to Install the RPS in a Rack

– 16 –

Rack-Mount Procedure

To rack mount the RPS, follow these steps:

1. Attach the brackets to the RPS using the screws provided in the Rack Mounting Kit.

Figure 4: Attaching the Extension Brackets

2. Following your rack plan, mark the holes in the rack where the RPS will be

installed.

3. Lift the RPS into the rack so that it is aligned with the marked holes.

4. With the RPS brackets properly aligned, secure the RPS in the rack, using four rack-

mounting screws (not provided).

Rack Mounting Bracket Bracket Screws