RPS900W_IG-R01_1014

Chapter 1

| RPS Description and Specifications

Key Hardware Components

– 10 –

◆ The RPS will operate under a no-load condition.

Key Hardware Components

Two status indicators, SYS and PoE LEDs, are located on the RPU’s front panel. While the

AC input socket, grounding point, and DC output connector are located on the RPU’s

rear panel.

Figure 1: Front Panel

SYS and PoE LEDs

For information on the SYS and PoE LED indicators, see “Understanding the SYS and

PoE LEDs” on page 23.

Figure 2: Rear Panel

Ground Terminal

For information on the ground terminal and how to connect the chassis to ground, see

“Grounding the Chassis” on page 20.

SYS LED PoE LED

Ground Terminal 25-Pin DC Output Connector

AC Input Socket