RPS600WA-38 Manual

1-1
Chapter 1:
About the Redundant Power Supply
Overview
This External Redundant Power Supply (RPS) can supply 600 Watts of backup
power to four switches in the event of an AC loss or failure of an internal power
supply.
Features and Benefits
• Supports four switch units with 11.5 VDC outputs of up to 150 W.
• Indicator LEDs located on the front panel.
• RPS AC line cord can draw power from a different supply circuit.
• DC line cords provide backup power to attached devices.
• Thermal overload protection prevents the RPS from overheating if a thermal
overload occurs.
• Over-voltage protection shuts down an output channel if the voltage exceeds a
preset threshold. (12.3 V)
• Over-current protection shuts down the RPS if the output load exceeds a preset
threshold. (14.5 A)
• Short-circuit protection prevents the RPS from being damaged from a short circuit
on any output channel.
• The RPS will operate under a no-load condition.