Datasheet

TEL: [phone] FAX: [phone]
No.1, Creation Rd. III, Hsinchu Science Park, Taiwan 30077
[e-mail] www.edge-core.com
TEL: [phone]
20 Mason Irvine, CA 92618
www.edge-core.com
OMP800 Product Specifications
Features
Ports
Switch Ports:
256 x 100 G QSFP28 each supporting
100G/40G and 2 x 50G/4 x 25G/4 x 10G break-out cable
Management Ports on Front Panel:
Line card
2 x USB console port
2 x USB data port
Fabric card
1 x RJ-45 management port
2 x RJ-45 console port
2 x USB data port
Key Components
Switch Silicon: Broadcom BCM56960 Tomahawk 3.2 Tbps
BCM56960 x 2 for each line and fabric card
CPU modules x 2 for each line and fabric card
CPU Modules (2 CPU modules on each line card and fabric card):
Intel Rangeley 2.4 GHz processor
DDR4 SO-DIMM Max: 32GB x 2 slots
NOR Flash 64 MB
NAND Flash 32GB
Performance
Wire Speed Forwarding: L2 and L3
Switching Capacity: 25.6 Tbps
Jumbo frames: 9 K Bytes
Packet Buffer Size: 16 MB integrated packet buffer
Subject to NOS:
MAC Addresses: 8 K min./136 max.
VLAN IDs: 4K
IPv4: 16 K min./112 K max. host entries; 16 K LPM entries with
TCAM-only mode
IPv6: 8 K min./56 K max. host entries; IPv6/64=8 K TCAM-only
mode
Supported Optics and Cables
QSFP Ports:
40GBASE-CR4 DAC: up to 3 m passive; up to 10 m active
40GBASE-CR4 DAC to 4 x SFP+ up to 3 m passive, up to 10 m
active
40GBASE-SR4: up to 100 m over OM3 MMF, 150 m over OM4 MMF
40GBASE-LR4: up to 10 km over SMF
QSFP28 Ports:
100GBASE Active Optical Cables
100GBASE-SR4: up to 70 m over OM3 MMF, 100 m over OM4 MMF
100GBASE-LR4: up to 10 km over SMF
Physical
Dimensions (WxDxH): 76.2 x 53.34 x 44.45 cm
Weight of the line cards:5.42 kg
Weight of the fabric cards: 5.19 kg
Weight of Chassis with Fabric card x 4 and Line card x 8: 200 kg
Fans: hot-swappable redundant fan modules
16 fans
Environmental
Operating Temperature: 0°C to 40°C (32°F to 104°F)
Storage Temperature: -40°C to 40°C (-40°F to 104°F)
Operating Humidity: 5% to 95% non-condensing
Software
Switch is loaded with Open Network Install Environment (ONIE)
software installer
Compatible with the following NOS optoins: Supports Cumulus
Linux versions are version 3.5 or greater
Power
PSUs: Redundant hot swappable power supply modules
OMP800: 3 + 3
AC input range: 220 V ~ 240 VAC/47 ~ 63 Hz
Regulatory
EMI
CE Mark
EN55032 Class A, EN55024, EN61000-3-2, EN61000-3-3
FCC Part 15 Class A
VCCI Class A
Safety
CB, UL/CUL
Environmental:
Temperature: IEC 68-2-14
Vibration: IEC 68-2-36, IEC 68-2-6
Shock: IEC 68-2-29
RoHS-6 Compliant
Warranty
Please check www.edge-core.com for the warranty terms in your
country.
For More Information
To find out more about Edgecore Networks Corporation products and
solutions, visit www.edge-core.com.
About Edgecore Networks Corporation
Edgecore Networks Corporation is in the business of providing innovative
network solutions. In the service provider network, in the data center or in
the cloud, Edgecore Networks Corporation delivers the software and
systems that transform the way the world connects. Edgecore Networks
Corporation serves customers and partners worldwide. Additional
information can be found at www.edge-core.com.
Edgecore Networks Corporation is a subsidiary of Accton Technology
Corporation, the leading network ODM company. The Edgecore Data
Center switches are developed and manufactured by Accton.
To purchase Edgecore Networks solutions, please contact your
Edgecore Networks Corporation representatives at [phone] (HQ)
or [phone] or authorized resellers.
© Copyright 2016 Edgecore Networks Corporation. The information contained herein is
subject to change without notice. This document is for informational purposes only and
does not set forth any warranty, expressed or implied, concerning any equipment,
equipment feature, or service offered by Edgecore Networks Corporation. Edgecore
Networks Corporation shall not be liable for technical or editorial errors or omissions
contained herein.
EC-DS-1117-01