Installation Guide-R03
Table Of Contents
- Front Cover
- Compliances and Safety Statements
- About This Guide
- Contents
- Tables
- Figures
- Introduction
- Installing the Switch
- Making Network Connections
- Troubleshooting
- Cables
- Specifications
- Glossary
- Index
- Back Cover
– 25 –
1 INTRODUCTION
OVERVIEW
The ES3528MV2 and ES3528MV2-DC are intelligent switches with 24 10/
100BASE-T ports, and four Gigabit combination ports
1
that are comprised of an
RJ-45 port and an SFP transceiver slot. There is also an SNMP-based
management agent embedded on the main board. This agent supports both in-
band and out-of-band access for managing the switch.
These switches provide a broad range of powerful features for Layer 2 switching,
delivering reliability and consistent performance for your network traffic. They
bring order to poorly performing networks by segregating them into separate
broadcast domains with IEEE 802.1Q compliant VLANs, and empower
multimedia applications with multicast switching and CoS services.
Figure 1: Front and Rear Panels
1. RJ-45 ports shared with a SFP tranceiver slots. If an SFP transceiver is plugged in,
the corresponding RJ-45 port is disabled.
ES3528MV2
1 3 5 7 9 11131517192123
25 27
26 282 4 6 8 10 12 14 16 18 20 22 24
Console
PWR
DIAG
1000M
1000M
Link/ACT
Link/ACT
10/100 Mbps RJ-45 Ports
Console
Port
System Indicators
Combination
Gigabit Ports
AC Power Socket
Port Status
Indicators
DC Power Socket