ES3528MV2 DC_Management Guide-R03

C HAPTER 3 | Using the Web Interface
Navigating the Web Browser Interface
– 104 –
MSTP Multiple Spanning Tree Algorithm 255
Configure Global 255
Add Configures initial VLAN and priority for an MST instance 255
Modify Configures the priority or an MST instance 255
Show Configures global settings for an MST instance 255
Add Member Adds VLAN members for an MST instance 255
Show Member Adds or deletes VLAN members for an MST instance 255
Show Information Displays MSTP values used for the bridge
Configure Interface 259
Configure Configures interface settings for an MST instance 259
Show Information Displays interface settings for an MST instance 259
Traffic
Rate Limit Sets the input and output rate limits for a port 261
Storm Control Sets the broadcast storm threshold for each interface 262
Auto Traffic Control Sets thresholds for broadcast and multicast storms which can be
used to trigger configured rate limits or to shut down a port
264
Configure Global Sets the time to apply the control response after traffic has
exceeded the upper threshold, and the time to release the control
response after traffic has fallen beneath the lower threshold
266
Configure Interface Sets the storm control mode (broadcast or multicast), the traffic
thresholds, the control response, to automatically release a
response of rate limiting, or to send related SNMP trap messages
267
Priority
Default Priority Sets the default priority for each port or trunk 271
Queue Sets queue mode for the switch; sets the service weight for each
queue that will use a weighted or hybrid mode
272
Trust Mode Selects DSCP or CoS priority processing 278
DSCP to DSCP 279
Add Maps DSCP values in incoming packets to per-hop behavior and
drop precedence values for internal priority processing
279
Show Shows the DSCP to DSCP mapping list 279
CoS to DSCP 282
Add Maps CoS/CFI values in incoming packets to per-hop behavior and
drop precedence values for priority processing
282
Show Shows the CoS to DSCP mapping list 282
PHB to Queue 275
Add Maps internal per-hop behavior values to hardware queues 275
Show Shows the PHB to Queue mapping list 275
DiffServ 285
Configure Class 286
Add Creates a class map for a type of traffic 286
Table 6: Switch Main Menu (Continued)
Menu Description Page