ES3528MV2 DC_Management Guide-R03

C HAPTER 3 | Using the Web Interface
Navigating the Web Browser Interface
– 103 –
Configure Interface 216
Add Maps a protocol group to a VLAN 216
Show Shows the protocol groups mapped to each VLAN 216
IP Subnet 219
Add Maps IP subnet traffic to a VLAN 219
Show Shows IP subnet to VLAN mapping 219
MAC-Based 221
Add Maps traffic with specified source MAC address to a VLAN 221
Show Shows source MAC address to VLAN mapping 221
Mirror 222
Add Mirrors traffic from one or more source VLANs to a target port 222
Show Shows mirror list 222
Translation 224
Add Maps VLAN IDs between the customer and service provider 224
Show Displays the configuration settings for VLAN translation 224
MAC Address 227
Learning Status Enables MAC address learning on selected interfaces 227
Static 229
Add Configures static entries in the address table 229
Show Displays static entries in the address table 229
Dynamic
Configure Aging Sets timeout for dynamically learned entries 231
Show Dynamic MAC Displays dynamic entries in the address table 232
Clear Dynamic MAC Removes any learned entries from the forwarding database and
clears the transmit and receive counts for any static or system
configured entries
233
Mirror Mirrors traffic matching a specified source address from any port
on the switch to a target port
234
Spanning Tree 237
Loopback Detection Configures Loopback Detection parameters 240
STA Spanning Tree Algorithm
Configure Global
Configure Configures global bridge settings for STP, RSTP and MSTP 242
Show Information Displays STA values used for the bridge 247
Configure Interface
Configure Configures interface settings for STA 248
Show Information Displays interface settings for STA 252
Table 6: Switch Main Menu (Continued)
Menu Description Page