Installation Guide R02
Table Of Contents
- ES3510MA Fast Ethernet Switch
- Compliances and Safety Statements
- About This Guide
- Contents
- Tables
- Figures
- Introduction
- Network Planning
- Installing the Switch
- Making Network Connections
- Troubleshooting
- Cables
- Specifications
- Glossary
- Index
– 23 –
1 INTRODUCTION
OVERVIEW
The ES3510MA is a Fast Ethernet Layer 2 switch with 8 100BASE-TX ports, and
two combination 1000BASE-T ports: RJ-45/Small Form Factor Pluggable (SFP)
transceiver slots
1
(see Figure 1-1, Ports 9-10). The switch also includes an
SNMP-based management agent, which provides both in-band and out-of-band
access for managing the switch.
The ES3510MA provides a broad range of powerful features for Layer 2
switching, delivering reliability and consistent performance for your network
traffic. It brings order to poorly performing networks by segregating them into
separate broadcast domains with IEEE 802.1Q compliant VLANs, and empowers
multimedia applications with multicast switching and CoS services.
Figure 1: Front Panel
1. If an SFP transceiver is plugged in, the corresponding RJ-45 port is disabled for
ports 9-10.
1357 9
Diag
Power
Port Status Indicators
1000BASE-T/SFP CombinationPorts
System Indicators
Console Port
100 Mbps RJ-45 Ports