Installation Guide
Table Of Contents
- Compliances and Safety Statements
- About This Guide
- Contents
- Tables
- Figures
- Introduction
- Network Planning
- Installing the Switch
- Making Network Connections
- Troubleshooting
- Cables
- Specifications
- Glossary
- Index
C
HAPTER
3
| Installing the Switch
Connecting to the Console Port
– 39 –
WIRING MAP FOR SERIAL CABLE
The serial port’s configuration requirements are as follows:
◆ Default Baud rate—115,200 bps
◆ Character Size—8 Characters
◆ Parity—None
◆ Stop bit—One
◆ Data bits—8
◆ Flow control—none
Table 5: Serial Cable Wiring
Switch 8-PIN Serial Port Null Modem PC’s 9-PIN DTE Port
6 RXD (receive data) <----------------------- 3 TXD (transmit data)
3 TXD (transmit data) ------------------------> 2 RXD (receive data)
5 SGND (signal ground) -------------------------- 5 SGND (signal ground)