Installation Guide
Table Of Contents
- Compliances and Safety Statements
- About This Guide
- Contents
- Tables
- Figures
- Introduction
- Network Planning
- Installing the Switch
- Making Network Connections
- Troubleshooting
- Cables
- Specifications
- Glossary
- Index
– 19 –
1 INTRODUCTION
OVERVIEW
The ES3510MA-DC is a Fast Ethernet Layer 2 switch with 8 100BASE-TX ports,
and two combination 1000BASE-T ports: RJ-45 ports and Small Form Factor
Pluggable (SFP) transceiver slots
1
. The switch also includes an SNMP-based
management agent, which provides both in-band and out-of-band access for
managing the switch.
The ES3510MA-DC provides a broad range of powerful features for Layer 2
switching, delivering reliability and consistent performance for your network
traffic. It brings order to poorly performing networks by segregating them into
separate broadcast domains with IEEE 802.1Q compliant VLANs, and empowers
multimedia applications with multicast switching and CoS services.
Figure 1: Front Panel
1. If an SFP transceiver is plugged in, the corresponding RJ-45 port is disabled for
ports 9-10.
Port Status Indicators
1000BASE-T/SFP Combination Ports
System Indicators
Console Port
100 Mbps RJ-45 Ports