ES3510 Management Guide R05

Table Of Contents
A
BOUT
T
HIS
G
UIDE
– 8 –
Added "ip igmp authentication" on page 1218 and "show ip igmp
authentication" on page 1223.
Updated syntax for "ip igmp query-drop" on page 1222.
Added "ip multicast-data-drop" on page 1222 and "show ip
multicast-data-drop" on page 1226.
Added "MLD Filtering and Throttling" on page 1237.
Updated range of priority parameter for "mvr priority" on page 1248.
Added "clear mrv groups dynamic" on page 1257.
Added "clear mrv statistics" on page 1258.
Updated parameter options for "show mvr statistics" on page 1263.
Added "clear mvr6 statistics" on page 1279.
Updated range of interval-level parameter for "ethernet cfm cc ma
interval" on page 1331.
Added "clear efm oam event-log" on page 1358.
Updated definition of netmask parameter for "ip address" on
page 1388.
Added parameter option for "traceroute6" on page 1416
DECEMBER 2012 REVISION
This is the second version of this guide. This guide is valid for software
release v1.2.4.2. It includes information on the following changes:
Removed support for VLAN translation.
Removed egress port option from Security > ACL (Configure Interface -
Configure) page under "Binding a Port to an Access Control List" on
page 367, the ip access-group command page 948, the ipv6 access-
group command page 954, and the mac access-group command
page 960.
Added "IPv6 Source Guard" on page 403.
Added UDP Port parameter to "Remote Log Configuration" on page 420
and logging host command on page 741.
Added "Ethernet Ring Protection Switching" on page 487, and "ERPS
Commands" on page 1085.
Added "Connectivity Fault Management" on page 512.
Added "OAM Configuration" on page 548.