ES3510 Management Guide R05

C HAPTER 14 | Basic Administration Protocols
Connectivity Fault Management
– 533 –
PARAMETERS
These parameters are displayed:
◆ MD Index – Domain index. (Range: 1-65535)
◆ MA Index – MA identifier. (Range: 1-2147483647)
◆ Source MEP ID – The identifier of a source MEP that will send the link
trace message. (Range: 1-8191)
◆ Target
■
MEP ID – The identifier of a remote MEP that is the target of a link
trace message. (Range: 1-8191)
■
MAC Address – MAC address of a remote MEP that is the target of
a link trace message. This address can be entered in either of the
following formats: xx-xx-xx-xx-xx-xx or xxxxxxxxxxxx
◆ TTL – The time to live of the link trace message. (Range: 0-255 hops)
WEB INTERFACE
To transmit link trace messages:
1. Click Administration, CFM.
2. Select Transmit Link Trace from the Step list.
3. Select an entry from MD Index and MA Index.
4. Specify the source MEP, the target MEP using either its MEP identifier or
MAC address, and set the maximum number of hops allowed in the TTL
field.
5. Click Apply.
6. Check the results in the Link Trace cache (see "Displaying the
Link Trace Cache").
Figure 305: Transmitting Link Trace Messages