ES3510 Management Guide R05

ManualsBrandsEdgecore Networks ManualsEnterpriseL2 Fast Ethernet Standalone Switch

301

302

303

304

305

306

307

308

309

310

Table Of Contents

HAPTER

| Security Measures

AAA Authentication, Authorization and Accounting

– 310 –

sequence of servers. The process ends when a server either

approves or denies access to a user.

■

Server IP Address – Address of authentication server.

(A Server Index entry must be selected to display this item.)

■

Accounting Server UDP Port – Network (UDP) port on

authentication server used for accounting messages.

(Range: 1-65535; Default: 1813)

■

Authentication Server UDP Port – Network (UDP) port on

authentication server used for authentication messages.

(Range: 1-65535; Default: 1812)

■

Authentication Timeout – The number of seconds the switch

waits for a reply from the RADIUS server before it resends the

request. (Range: 1-65535; Default: 5)

■

Authentication Retries – Number of times the switch tries to

authenticate logon access via the authentication server.

(Range: 1-30; Default: 2)

■

Set Key – Mark this box to set or modify the encryption key.

■

Authentication Key – Encryption key used to authenticate logon

access for client. Do not use blank spaces in the string. (Maximum

length: 48 characters)

■

Confirm Authentication Key – Re-type the string entered in the

previous field to ensure no errors were made. The switch will not

change the encryption key if these two fields do not match.

◆ TACACS+

■

Global – Provides globally applicable TACACS+ settings.

■

Server Index – Specifies the index number of the server to be

configured. The switch currently supports only one TACACS+ server.

■

Server IP Address – Address of the TACACS+ server.