ES3510 Management Guide R05

C HAPTER 38 | Multicast Filtering Commands
MVR for IPv4
– 1258 –
Example
Console#clear mrv groups dynamic
Console#
clear mrv statistics This command clears MRV statistics.
SYNTAX
clear mrv statistics [interface interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)
port-channel channel-id (Range: 1-16)
vlan vlan-id - VLAN identifier (Range: 1-4094)
COMMAND MODE
Privileged Exec
EXAMPLE
Console#clear ip igmp snooping statistics
Console#
show mvr This command shows information about MVR domain settings, including
MVR operational status, the multicast VLAN, the current number of group
addresses, and the upstream source IP address.
SYNTAX
show mvr [domain domain-id]
domain-id - An independent multicast domain. (Range: 1-5)
DEFAULT SETTING
Displays configuration settings for all MVR domains.
COMMAND MODE
Privileged Exec
EXAMPLE
The following shows the MVR settings:
Console#show mvr
MVR 802.1p Forwarding Priority : Disabled
MVR Proxy Switching : Enabled