ES3510 Management Guide R05

C HAPTER 38 | Multicast Filtering Commands
MLD Snooping
– 1228 –
ipv6 mld snooping This command enables MLD Snooping globally on the switch. Use the no
form to disable MLD Snooping.
SYNTAX
[no] ipv6 mld snooping
DEFAULT SETTING
Disabled
COMMAND MODE
Global Configuration
EXAMPLE
The following example enables MLD Snooping:
Console(config)#ipv6 mld snooping
Console(config)#
ipv6 mld snooping
querier
This command allows the switch to act as the querier for MLDv2 snooping.
Use the no form to disable this feature.
SYNTAX
[no] ipv6 mld snooping querier
DEFAULT SETTING
Disabled
COMMAND MODE
Global Configuration
COMMAND USAGE
◆ If enabled, the switch will serve as querier if elected. The querier is
responsible for asking hosts if they want to receive multicast traffic.
◆ An IPv6 address must be configured on the VLAN interface from which
the querier will act if elected. When serving as the querier, the switch
uses its own IPv6 address as the query source address.
◆ The querier will not start or will disable itself after having started if it
detects an IPv6 multicast router on the network.
EXAMPLE
Console(config)#ipv6 mld snooping querier
Console(config)#