(AS4630-54NPE) Quick Start Guide-R02
Table Of Contents
– 1 –
Quick Start Guide
E112022-MR-R02
150200002275A
Ethernet Switch
AS4630-54NPE | AS4630-54NPEM
1.
AS4630-54NPE or AS4630-54NPEM Ethernet Switch
2. Rack mounting kit—2 front-post brackets, 2 rear-post brackets,
and screw kit
3. 2 x Power cord
4. Console cable—RJ-45 to D-Sub
5. Documentation—Quick Start Guide (this document) and Safety
1. 1x USB port
2. 1 x Management port
3.
1 x Serial console port
4. System buttons/LEDs
5. 36 x RJ45 2.5G PoE ports
6. 12 x RJ45 10G PoE Ports
7. 4 x SFP28 25G ports
8. 2 x QSFP28 40G/100G uplink or stacking ports
9. 3 x Fan trays
10. 2 x AC PSUs
9
1
10
8
7
5
2
3
4
6
Package Contents
Overview
FRU Replacement
STK M/S button
Reset button
System LED: Green (OK), Amber (fault)
PRI LED: Green (primary unit), Amber (secondary unit)
PSU LEDs: Green (OK), Amber (fault)
STK LEDs: Green (stacking ports active)
FAN LED: Green (OK), Amber (fault)
PoE LED: Green (OK), Amber (High PoE load)
RJ-45 Port LEDs: Green (link), Amber (link with PoE), Blinking (activity)
SFP28 Port LEDs: White (25G), Green (10G), Blinking (activity)
QSFP28 Port LEDs: White (100G), Green (40G link), Blinking (activity)
PSU Status LED: Green (OK), Red (fault or fan failure)
Fan Tray Status LED: Green (OK), Red (fault)
System Buttons/LEDs
Port/FRU LEDs
1 2 3 4 5
Fan Tray Replacement
1. Loosen the fan tray screw.
2. Remove fan tray from the
chassis.
3. Install replacement fan with
matching airflow direction.
PSU Replacement
1. Remove the power cord.
2. Press the release latch and
remove the PSU.
3. Install replacement PSU with
matching airflow direction.
www.edge-core.com