Datasheet

Regulatory
EMI:
EN55032 Class A
EN55024
EN55035
EN61000-3-2
EN61000-3-3
FCC Part 15, Subpart B Class A
VCCI Class A
CCC
BSMI 13438
Safety
CB
UL
CCC
BSMI 14336-1
RoHS-2.0 Compliant
Warranty
Please check www.edge-core.com for the warranty terms in your
country.
For More Information
To find out more about Edgecore Networks Corporation products
and solutions, visit www.edge-core.com.
About Edgecore Networks Corporation
Edgecore Networks Corporation is in the business of providing
innovative network solutions. In the service provider network, in the
data center or in the cloud, Edgecore Networks Corporation delivers
the soſtware and systems that transform the way the world
connects. Edgecore Networks Corporation serves customers and
partners worldwide. Additional information can be found at
www.edge-core.com.
Edgecore Networks Corporation is a subsidiary of Accton
Technology Corporation, the leading network ODM company. The
Edgecore data center switches are developed and manufactured by
Accton.
To purchase Edgecore Networks solutions, please contact your
Edgecore Networks Corporation representatives at +886 3 563 8888
(HQ) or +1 (949)-336-6801 or authorized resellers.
© Copyright 2021 Edgecore Networks Corporation. The information contained herein
is subject to change without notice. This document is for informational purposes only
and does not set forth any warranty, expressed or implied, concerning any
equipment, equipment feature, or service offered by Edgecore Networks Corporation.
Edgecore Networks Corporation shall not be liable for technical or editorial errors or
omissions contained herein.
Ports
Switch Ports:
48 x RJ-45 100/1000BASE-T ports
4 x 25G SFP28 uplink ports
2 x 100G QSFP28 stacking ports (requires NOS to support
hardware stacking feature)
Management Ports:
1 x RJ-45 serial console
1 x RJ-45 100/1000BASE-T management port
1 x Type-A USB storage port
Key Components
Switch Silicon: Broadcom BCM56371 Trident III 480 Gpbs
CPU: Intel Atom/Denverton C3558 4-cores 2.2 GHz x86 processor
DDR4: 8 GB x 2 SO-DIMM
SPI Flash: 16 MB x 2
m.2 SSD: 32 GB MLC
Performance
Switchibg Capacity: 960 Gpbs full duplex
Forwarding Rate: 744 Mpps
MAC Addresses: 16K min./112K max.
VLAN IDs: 4K
Jumbo Frames: Up to 12,288 bytes
Packet Buffer Size: 8 MB Integrated packet buffer memory
LEDs
GE RJ-45 SFP+ Port LEDs: Link Status, Activity
SFP28 Port LEDs: Port LEDs: Link Speed, Link Status, Activity
Ethernet Management Port LED: Link Status, Activity
System LEDs: PRI, PSU1, PSU2, STK1, STK2, FAN, PoE
Physical and Environmental
Dimensions (WxDxH): 43.8 x 44.2 x 4.37 cm (17.24 x 17.40 x 1.72 in)
Weight: 7.67 kg (16.91 lb), with two installed PSUs
Operating Temperature: 0°C to 45°C (32°F to 113°F)
Storage Temperature: -40°C to 70°C (-40°F to 158°F)
Operating Humidity: 5% to 90% non-condensing
Soſtware
Switch is loaded with Open Network Install Environment (ONIE)
soſtware installer
Compatible with the following NOS options: open source
options, plus commercial NOS offerings.
Power
PSUs: 2 redundant, load-sharing, hot-swappable AC
Input Voltage: 100 to 240 VAC at 50-60 Hz
Power Consumption: 1800 Watts maximum
Note: AC PSUs are redundant in terms of system and
networking, but not fully redundant in terms of PoE functions
and the power budget.
EPS202 Enterprise Switch