Datasheet

ManualsBrandsEdgecore Networks ManualsEnterprise348G Enterprise Switch

Enterprise Switch

AS4630-54PE

The Edgecore EPS202 is a high-performance Gigabit Ethernet Layer 3 switch featuring 54 ports; the EPS202 has

48 10/100/1000BASE-T ports, 4 x 25G SFP28 uplink ports, and 2 x 100G QSFP28 stacking ports (stacking capability

subject to NOS implementations); plus the 48 10/100/1000BASE-T ports fully support IEEE 802.3at and IEEE

802.3bt Power-over-Ethernet (PoE).

The EPS202 is ideal as a data center top-of-rack switch, it includes redundant hot-swappable AC PSUs and

port-to-power airﬂow. It is ideal for campus networking, with the EPS202 able to provide up to 90 Watts (Depends

on the PoE power budge) of power per port to attached devices, such as VoIP phones, wireless access points,

surveillance cameras etc, fully utilizing existing Cat. 6 cable infrastructure. This open network switch is loaded with

the Open Network Install Environment (ONIE), which supports the installation of compatible Network Operating

System soﬅware, including the open source options, plus commercial NOS oﬀerings.

■ Cost-eﬀective, open network switch for data center racks or for enterprise environment.

■ 1 GbE connections to server and storage nodes in rack, with 25 GbE uplinks to spine network.

■ PoE models ideal for enterprise, hospitality, warehouse applications interconnecting security, camera, Wi-Fi

devices.

■ 48 x 10/100/1000BASE-T RJ-45 ports.

■ 4 x SFP+ uplink ports, supporting 25 GbE.

■ Full line-rate L2 or L3 forwarding and switching.

■ Hot-swappable, load-sharing, redundant AC PSUs.

■ Hardware switch pre-loaded with Open Network Install Environment (ONIE) for automated loading of

compatible open source and commerical NOS oﬀerings.

Key Features and Beneﬁts

EPS202 Enterprise Switch

Summary of content (4 pages)

PAGE 1
EPS202 Enterprise Switch Enterprise Switch AS4630-54PE The Edgecore EPS202 is a high-performance Gigabit Ethernet Layer 3 switch featuring 54 ports; the EPS202 has 48 10/100/1000BASE-T ports, 4 x 25G SFP28 uplink ports, and 2 x 100G QSFP28 stacking ports (stacking capability subject to NOS implementations); plus the 48 10/100/1000BASE-T ports fully support IEEE 802.3at and IEEE 802.3bt Power-over-Ethernet (PoE).
PAGE 2
EPS202 Enterprise Switch Free Soﬅware Included Interfaces 1 2 3 4 5 7 8 9 3 10 11 Description 1. USB storage port 7. Management port 2. System LEDs 8. Console port 3. Port indicators 9. Grounding point 4. 48 x 1G RJ-45 ports 10. Hot-swappable 2 + 1 redundant fans 5. 25G SFP28 ports 11. PSU 2 6. QSFP28 Stacking ports 12.
PAGE 3
EPS202 Enterprise Switch Ports ■ Switch Ports: 48 x RJ-45 100/1000BASE-T ports 4 x 25G SFP28 uplink ports 2 x 100G QSFP28 stacking ports (requires NOS to support hardware stacking feature) ■ Management Ports: 1 x RJ-45 serial console 1 x RJ-45 100/1000BASE-T management port 1 x Type-A USB storage port Key Components ■ Switch Silicon: Broadcom BCM56371 Trident III 480 Gpbs ■ CPU: Intel Atom/Denverton C3558 4-cores 2.2 GHz x86 processor ■ DDR4: 8 GB x 2 SO-DIMM ■ SPI Flash: 16 MB x 2 ■ m.
PAGE 4
EPS202 Enterprise Switch Ordering Information Base model: AS4630-54PE; Intel® Atom® Denverton Processor; 48-Port 1G BASE-T with PoE++ + 4-port 25G uplink + 2 x 100G QSFP28 stacking port; ONIE soﬅware installer. Model Number Part Number PSU Airflow Region (power cord) AS4630-54PE-O-AC-F-US F0PZZ4654408A Dual AC PSUs port-to-power airﬂow N.