Datasheet

ManualsBrandsEdgecore Networks ManualsWireless802.11ac Dual-Band Wireless FIT Access Point

For a world always connected…

ECW7220-L

802.11ac Dual-Band Wireless

Controller-based Access Point

Product Overview

The ECW7220-L is an indoor 802.11a/b/g/n/ac dual-band, dual-radio enterprise controller-based AP with a 3x3 MIMO

antenna conﬁguration. Through its Gigabit Ethernet port, the 802.11ac dual-band wireless AP can connect to the

backbone network. The ECW7220-L supports 802.3at/af PoE, which enables the AP to be powered remotely by a PoE

switch. An AC power adapter option is also included for locations where PoE is not available.

Key Features and Benefits

Wireless 802.11ac Technology

Using 802.11ac MIMO (Multiple Input Multiple)

wireless technology, the AP supports three

transmitting and three receiving antennas that extend

the range and increase the throughput by up to nine

times that of existing Wi-Fi.

Full Management Capabilities

The AP supports Simple Network Management

Protocol (SNMP v1/v2c/v3), including MIB II and MIB I.

The IEEE 802.1X authentication protocol supports

Extensible Authentication Protocol (EAP) MD5,

Transport Layer Security (TLS), Protected EAP (PEAP),

Tunneled TLS (TTLS), EAP-SIM, and EAP-AKA.

Application Diagram

Advanced Traffic Management

Support for up to sixteen Virtual Access Point (VAP)

interfaces per radio, which allows trafﬁc to be separated for

different user groups within the same service area. Each

radio can support up to 100 wireless clients, shared between

all VAPs, whereby the clients associate with each VAP in the

same way as they would with physically separate APs. This

means that each VAP can be conﬁgured with its own Service

Set Identiﬁcation (SSID), security settings, VLAN

assignments, and other parameters, allowing the AP to serve

a diverse range of client needs from a single unit.

Dual-Band Access Point

Easy on your budget and simple to install, the AP uses

dynamic rate shifting to automatically match the best

connection speed, keeping users connected to the network

even while roaming.

802.11ac Dual-Band Wireless Controller-based Access Point

www.edge-core.com

DATASHEET

WDS Links

Between Access Points

VAP 0

WDS STA Mode

VAP 2

AP Mode

VAP 0

WDS STA Mode

VAP 2

AP Mode

VAP 0

WDS AP Mode

VAP 1

AP Mode

VAP 0

WDS STA Mode

VAP 1

WDS AP Mode

VAP 0

WDS STA Mode

VAP 1

WDS AP Mode

VAP 1

AP Mode

Network

Core

Summary of content (3 pages)

PAGE 1
DATASHEET www.edge-core.com ECW7220-L 802.11ac Dual-Band Wireless Controller-based Access Point Product Overview The ECW7220-L is an indoor 802.11a/b/g/n/ac dual-band, dual-radio enterprise controller-based AP with a 3x3 MIMO antenna conﬁguration. Through its Gigabit Ethernet port, the 802.11ac dual-band wireless AP can connect to the backbone network. The ECW7220-L supports 802.3at/af PoE, which enables the AP to be powered remotely by a PoE switch.
PAGE 2
ECW7220-L Product Specifications www.edge-core.com Features Features Physical Features One 10/100/1000BASE-T Gigabit Ethernet (RJ-45) port with 802.3at/af-compliant Power over Ethernet (PoE) support One 10/100/1000BASE-T Gigabit Ethernet (RJ-45) One console port (10/100/1000BASE-T) with an RJ-45 connector Two LEDs: Power/Diag, WLAN1/WLAN2/LAN Six embedded omni antennas PoE 802.3at/af compliant Standard IEEE 802.11n 2.4 GHz and 5.0 GHz IEEE 802.11ac/a 5.0 GHz IEEE 802.11b/g, 2.4 GHz IEEE 802.
PAGE 3
ECW7220-L Product Specifications www.edge-core.com Features Features Environmental Specification Temperature: Standard Operating: 0°C to 50°C (32°F to 122°F) Storage: -20°C to 70°C (-4°F to 158°F) Humidity: 10% to 90% (non-condensing) Warranty Please check www.edge-core.com for the warranty terms in your country. For More Information To ﬁnd out more about Edgecore Networks Corporation products and solutions, visit www.edge-core.com.