User's Manual

Quick Start Guide

– 3 –

3. Connect Cables Connect network cable to the Eth0/PoE 1000BASE-T RJ-45 port for your network

connection. The Etho/PoE port connection can also provide PoE power to the unit.

(Optional) Connect a local LAN switch or computers to the LAN1 and LAN2

100BASE-TX RJ-45 ports.

4. Connect Power If you do not power the unit using PoE, connect the AC power adapter to the AP

and to an AC power source.

Connect Category 5e or better cable to the Eth0/PoE RJ-45 port.

Connect the power adapter to the power socket on the AP.

Plug the power adapter into a nearby AC power source.