User's Manual

Safety and Regulatory Information
– 2 –
This device and it's antennas(s) must not be co-located or operating in conjunction
with any other antenna or transmitter except in accordance with FCC multi-
transmitter product procedures.
For product available in the USA/Canada market, only channel 1~11 can be
operated. Selection of other channels is not possible.
For operation within 5.15 ~ 5.25 GHz frequency range, it is restricted to indoor
environment. This device meets all the other requirements specified in Part 15E,
Section 15.407 of the FCC Rules.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20 cm between the radiator and your body.
Warnings and Cautionary Messages
Warning : This product does not contain any serviceable user parts.
Warning : Installation and removal of the unit must be carried out by qualified
personnel only.
Warning : When connecting this device to a power outlet, connect the field
ground lead on the tri-pole power plug to a valid earth ground line to prevent
electrical hazards.
Caution : Wear an anti-static wrist strap or take other suitable measures to prevent
electrostatic discharge when handling this equipment.
Caution : Do not plug a phone jack connector in the RJ-45 port. This may damage
this device.
Caution : Use only twisted-pair cables with RJ-45 connectors that conform to FCC
standards.
Caution: The planning and installation of the AP requires professional personnel
that are trained in the installation of radio transmitting equipment. The user is
responsible for compliance with local regulations concerning items such as
antenna power, use of lightning arrestors, grounding, and radio mast or tower
construction. Therefore, it is recommended to consult a professional contractor
knowledgeable in local radio regulations prior to equipment installation.