Management Guide

Chapter 2 | Status Information
Wireless Overview
– 25 –
◆ Gateway — The IP address of the default gateway router that is used when a
destination address is not on the local subnet.
◆ DNS 1 / DNS 2 — Shows configured Domain Name Server IP addresses.
Wireless Overview
The Wireless Overview section shows information about the radio settings.
Figure 9: Wireless Overview
The following items are displayed in this section:
◆ Radio # — Indicates the 5 GHz (Radio 0) or 2.4 GHz (Radio 1) wireless interface.
◆ SSID — Service set identifier. Clients that want to connect to the wireless
network must set their SSIDs to the same as that of the access point.
◆ Mode — Indicates Master (Access Point) or Client.
◆ Channel — The radio channel the access point uses to communicate with
wireless clients. The available channels depend on the 802.11 Mode
1
, Channel
Bandwidth, and Country Code settings
2
.
◆ MAC — MAC address assigned to this AP interface.
◆ Encryption — The encryption method configured on this interface.
1. See “Basic Settings” on page 29.
2. See “Setup Wizard” on page 15.