User's Manual

Quick Start Guide
– 2 –
4. Verify AP Operation
Power — on red for normal operation.
LAN — on/blinking green for a valid RJ-45 port link.
2G-WiFi/5G-WiFi — on/blinking green for radio enabled.
5. Connect to the Web User Interface
Connect a PC directly to the AP’s LAN port.
Set the PC IP address to be on the same subnet as the AP
(that is, the PC and AP addresses must both start 192.168.1.x
with subnet mask 255.255.255.0).
Enter the AP’s default management IP address of
192.168.1.1 into the web browser address bar.
Log in to the web interface using default settings:
User Name = root
Password = admin123
Note: To reset the AP to factory defaults, press the Reset
button for more than 5 seconds.
Note: For more information on AP configuration using the
web interface, refer to the Management Guide, which is on
the Edgecore web site, www.edge-core.com.
1
2
3
1
2
3
1
2
3
4
Hardware Specifications
Chassis
Size (W x D x H) 196 x 190 x 53 mm (7.72 x 7.48 x 2.09 inch)
Weight 554.2 g (1.22 lb)
Temperature Operating: 0 °C to 45 °C (32 °F to 113 °F)
Storage: -40 °C to 70 °C (-40 °F to 158 °F)
Humidity Operating: 5% to 95% (non-condensing)
Network Interfaces
Ports Eth/PoE RJ-45 Port: 1000BASE-T, PoE+ PD
2.4 GHz Radio IEEE 802.11b/g/n
5 GHz Radio IEEE 802.11a/ac/n
Radio Frequencies 2.4 – 2.4835 GHz (US, Canada, ETSI)
5.15 – 5.25 GHz (lower band) US/Canada,
Europe
5.725 – 5.825 GHz (upper band) US/Canada
Power Supply
PoE Input Power 48 VDC, 802.3af-standard compliant
AC Power Adapter AC Input: 100 ~ 240 VAC, 50/60 Hz
DC Output: 12 VDC, 1 A
Power Consumption 11 W maximum
Regulatory Compliances
Radio EN 300 328 V1.9.1 (2015-02)
EN 301 893 V1.8.1 (2015-03)
EN 301 489-1 V1.9.2 (2011-09)
EN 301 489-7 V2.2.1 (2012-09)
FCC Part 15C 15.247/15.207 (2.4-2.4835GHz,
5.725-5.850GHz) 2014
FCC Part 15E 15.407 (5.150GHz-5.250GHz)
2014
Emissions EN 55022 2010+AC:2011
EN 61000-3-2:2014
FCC Class B Part 15, 2014
Immunity EN 55024 : 2010
EN 61000-4-2 : 2009
Safety UL (CSA 22.2 No. 60950-1 & UL60950-1)
CB (IEC/EN60950-1)