User's Manual

For a world always connected…
The ECW75211-O is an Wave 2 indoor 802.11a/b/g/n/ac dual-band, dual-radio 2x2 MIMO enterprise Indoor
AP to submit OCP(Open Compute Project) with ONIE(Open Network Install Environment) support.
Through its Gigabit Ethernet port the 802.11ac dual-band wireless AP can connect to the backbone network.
The ECW5211-O supports 802.3af PoE, which enables the AP to be powered remotely by a PoE switch. An
AC power adapter option is also included for locations where PoE is not available.
Product Overview
ECW5211-O
802.11ac OCP Wireless Access Point
DATASHEET
Wireless 802.11ac Technology
Using 802.11ac MIMO (Multiple Input Multiple)
wireless technology, the AP supports three
and three receiving antennas that extend range and
increase the throughput by up to nine times that of
existing Wi-Fi.
Wave 2, MU-MIMO
Support 4 clients at the same time. Also, it supports
beamforming and channel bonding(80MHzÆ160MHz)
Advanced Traffic Management
Support for up to eight Virtual Access Point (VAP)
interfaces per radio, which allows traffic to be separated
for different user groups within the same service area.
Each radio can support up to 100 wireless clients,
shared between all VAPs, whereby the clients associate
with each VAP in the same way as they would with
physically separate APs. This means that each VAP
can be configured with its own Service Set Identification
(SSID), security settings, VLAN assignments, and other
parameters, allowing the AP to serve a diverse range of
client needs from a single unit.
Dual-Band Access Point
Easy on your budget and simple to install, the AP uses
dynamic rate shifting to automatically match the best
connection speed, keeping users connected to the
network even while roaming.
Key Features and Benefits
Application Diagram