Web Management Guide-R02

Table Of Contents
Chapter 3
| Basic Management Tasks
Managing System Files
– 74 –
Untagged) on each port. (Refer to VLAN Configuration” on page 159.)
Max Supported VLAN Numbers – The maximum number of VLANs supported
on this switch.
Max Supported VLAN ID – The maximum configurable VLAN identifier
supported on this switch.
Web Interface
To view Bridge Extension information:
1. Click System, then Capability.
Figure 6: Displaying Bridge Extension Configuration
Managing System Files
This section describes how to upgrade the switch operating software or
configuration files, and set the system start-up files.
Copying Files via FTP/
FTPS/SFTP/TFTP or
HTTP
Use the System > File (Copy) page to upload/download firmware or configuration
settings using FTP, FTPS, SFTP, TFTP or HTTP. By backing up a file to a FTP/FTPS/
SFTP/TFTP server or management station, that file can later be downloaded to the
switch to restore operation. Specify the method of file transfer, along with the file
type and file names as required.
You can also set the switch to use new firmware or configuration settings without
overwriting the current version. Just download the file using a different name from
the current version, and then set the new file as the startup file.