CLI Reference Guide-R02

Chapter 12 | Link Aggregation Commands
– 445 –
Figure 2: MLAG Peer Operation
◆ When the MLAG peer member is down or nonexistent, learned MAC addresses
are synced through the peer link for the MLAG will be removed automatically.
Example
Console(config)#mlag group 1 domain 1 member ethernet 1/1
Console(config)#
show mlag This command shows MLAG configuration settings.
Command Mode
Privileged Exec
Example
Console#show mlag
Global Status : Enabled
Domain List : 1,2
MLAG List : 10,20,30-35,50
Console#
show mlag group The command shows MLAG group settings.
Command Mode
Privileged Exec
Syntax
show mlag group mlag-id
mlag-id – MLAG identifier. (Range: 1-1000)
Example
Console#show mlag group 1
Console#