CLI Reference Guide-R02

Chapter 4 | System Management Commands
System Status
– 114 –
show version This command displays hardware and software version information for the system.
Command Mode
Normal Exec, Privileged Exec
Example
Console#show version
Unit 1
Serial Number : S123456
Hardware Version : R0A
EPLD Version : 0.01
Number of Ports : 18
Main Power Status : Up
Redundant Power Status : Not present
Role : Master
Loader Version : 0.0.0.3
Linux Kernel Version : 3.10.70
Operation Code Version : 1.0.4.192
Console#
show watchdog This command shows if watchdog debugging is enabled.
Command Mode
Privileged Exec
Example
Console#show watchdog
Software Watchdog Information
Status : Enabled
AutoReload : Enabled
Console#
Table 15: show version – display description
Parameter Description
Serial Number The serial number of the switch.
Hardware Version Hardware version of the main board.
EPLD Version Version number of the erasable programmable logic device.
Number of Ports Number of built-in ports.
Main Power Status Displays the status of the main power supply.
Redundant Power Status Displays the status of the redundant power supply.
Role Shows that this switch is operating as Master or Slave.
Loader Version Version number of loader code.
Linux Kernel Version Version number of Linux kernel.
Operation Code Version Version number of runtime code.