CLI Reference Guide-R02

Chapter 8 | Authentication Commands
AAA
– 232 –
Default Setting
Authorization is not enabled
No servers are specified
Command Mode
Global Configuration
Command Usage
◆ The authorization of Exec mode commands is only supported by TACACS+
servers.
◆ Note that the default and method-name fields are only used to describe the
authorization method(s) configured on the specified TACACS+ server, and do
not actually send any information to the server about the methods to use.
Example
Console(config)#aaa authorization commands 15 default group tacacs+
Console(config)#
aaa authorization exec This command enables the authorization for Exec access. Use the no form to
disable the authorization service.
Syntax
aaa authorization exec {default | method-name}
group {tacacs+ | server-group}
no aaa authorization exec {default | method-name}
default - Specifies the default authorization method for Exec access.
method-name - Specifies an authorization method for Exec access.
(Range: 1-64 characters)
group - Specifies the server group to use.
tacacs+ - Specifies all TACACS+ hosts configured with the tacacs-server
host command.
server-group - Specifies the name of a server group configured with the
aaa group server command. (Range: 1-64 characters)
Default Setting
Authorization is not enabled
No servers are specified
Command Mode
Global Configuration