Web Management Guide-R05

Table Of Contents
Chapter 13
| Basic Administration Protocols
Simple Network Management Protocol
– 413
swMemoryUtiRisingThreshold
Notification
1.3.6.1.4.1.259.10.1.11.2.1.0.109 This notification indicates that the memory
utilization has risen from
memoryUtiFallingThreshold to
memoryUtiRisingThreshold.
swMemoryUtiFallingThreshold
Notification
1.3.6.1.4.1.259.10.1.11.2.1.0.110 This notification indicates that the memory
utilization has fallen from
memoryUtiRisingThreshold to
memoryUtiFallingThreshold.
dhcpRougeServerAttackTrap 1.3.6.1.4.1.259.10.1.11.2.1.0.114 This trap is sent when receiving a DHCP packet from
a rouge server.
lbdDetectionTrap 1.3.6.1.4.1.259.10.1.11.2.1.0.141 This trap is sent when a loopback condition is
detected by LBD.
lbdRecoveryTrap 1.3.6.1.4.1.259.10.1.11.2.1.0.142 This trap is sent when a recovery is done by LBD.
sfpThresholdAlarmWarnTrap 1.3.6.1.4.1.259.10.1.11.2.1.0.170 This trap is sent when the SFP's A/D quantity is not
within alarm/warning thresholds
swDyingGaspTrap 1.3.6.1.4.1.259.10.1.11.2.1.0.190 This trap is sent when the device loses power.
udldPortShutdownTrap 1.3.6.1.4.1.259.10.1.11.2.1.0.192 This trap is sent when the port is shut down by UDLD.
userAuthenticationFailureTrap 1.3.6.1.4.1.259.10.1.11.2.1.0.199 This trap is triggered if authentication fails.
userAuthenticationSuccessTrap 1.3.6.1.4.1.259.10.1.11.2.1.0.200 This trap is triggered if authentication succeeds.
loginTrap 1.3.6.1.4.1.259.10.1.11.2.1.0.201 This trap is sent when a user logs in.
logoutTrap 1.3.6.1.4.1.259.10.1.11.2.1.0.202
This trap is sent when a user logs out.
swAlarmInputRecover 1.3.6.1.4.1.259.10.1.11.2.1.0.203 This trap is fired when switch recovers from an alarm
input event.
craftPortLinkDown 1.3.6.1.4.1.259.10.1.11.2.1.0.206 This trap is sent when craft port enters down state
from other link states.
craftPortLinkUp 1.3.6.1.4.1.259.10.1.11.2.1.0.207 This trap is sent when craft port enters
up state from other link states.
fileCopyTrap 1.3.6.1.4.1.259.10.1.11.2.1.0.208 This trap is sent when file copy is executed.
If the copy action is triggered by system, the login
user information(trapVarLoginUserName/
trapVarLoginMethod/
trapVarLoginInetAddressTypes/
trapVarLoginInetAddres) will be null value.
userauthCreateUserTrap 1.3.6.1.4.1.259.10.1.11.2.1.0.209 This trap is sent when create user account.
userauthDeleteUserTrap 1.3.6.1.4.1.259.10.1.11.2.1.0.210 This trap is sent when delete user account.
userauthModifyUserPrivilegeTrap 1.3.6.1.4.1.259.10.1.11.2.1.0.211 This trap is sent when modify user privilege.
* These are legacy notifications and therefore must be enabled in conjunction with the corresponding traps on the SNMP
Configuration menu.
Table 30: Supported Notification Messages (Continued)
Model Level Group