Web Management Guide-R05

Chapter 13 | Basic Administration Protocols
Link Layer Discovery Protocol
– 394 –
Port Details – LLDP-MED Capability
8
◆ Device Class – Any of the following categories of endpoint devices:
■
Class 1 – The most basic class of endpoint devices.
■
Class 2 – Endpoint devices that supports media stream capabilities.
■
Class 3 – Endpoint devices that directly supports end users of the IP
communication systems.
■
Network Connectivity Device – Devices that provide access to the IEEE 802
based LAN infrastructure for LLDP-MED endpoint devices. These may be
any LAN access device including LAN switch/router, IEEE 802.1 bridge, IEEE
802.3 repeater, IEEE 802.11 wireless access point, or any device that
supports the IEEE 802.1AB and MED extensions defined by this Standard
and can relay IEEE 802 frames via any method.
◆ Supported Capabilities – The supported set of capabilities that define the
primary function(s) of the port:
■
LLDP-MED Capabilities
■
Network Policy
■
Location Identification
■
Extended Power via MDI – PSE
■
Extended Power via MDI – PD
■
Inventory
◆ Current Capabilities – The set of capabilities that define the primary
function(s) of the port which are currently enabled.
Port Details – Network Policy
8
◆ Application Type – The primary application(s) defined for this network policy:
■
Voice
■
Voice Signaling
■
Guest Signaling
■
Guest Voice Signaling
■
Softphone Voice
■
Video Conferencing
■
Streaming Video
■
Video Signaling
◆ Tagged Flag – Indicates whether the specified application type is using a
tagged or untagged VLAN.
8. These fields are only displayed for end-node devices advertising LLDP-MED TLVs.