Manualshelf

Web Management Guide-R05

ManualsBrandsEdgecore Networks ManualsEnterpriseL2 Gigabit Ethernet Carrier Grade Switch
151152153154155156157158159160
Table Of Contents
Chapter 5
| VLAN Configuration
IEEE 802.1Q VLANs
– 157 –
◆
Port Range
– Displays a list of ports. (Range: 1-12)
◆
Trunk Range
– Displays a list of ports. (Range: 1-12)
Note:
The PVID, acceptable frame type, and ingress filtering parameters for each
interface within the specified range must be configured on either the Edit Member
by VLAN or Edit Member by Interface page.
Web Interface
To configure static members by the VLAN index:
1.
Click VLAN, Static.
2.
Select a VLAN from the scroll-down list.
3.
Select Edit Member by VLAN from the Action list.
4.
Set the Interface type to display as Port or Trunk.
5.
Modify the settings for any interface as required.
6.
Click Apply.
Figure 72: Configuring Static Members by VLAN Index
To configure static members by interface:
1.
Click VLAN, Static.
2.
Select Edit Member by Interface from the Action list.
3.
Select a VLAN from the scroll-down list.
4.
Set the Interface type to display as Port or Trunk.